Your furnace is the most important system in your Calgary home. It runs nearly continuously from late September through early May, keeping your family comfortable through one of the most demanding heating climates in Canada. When it is time to replace an aging or failing system, the work needs to be done right: properly sized for your home, correctly connected to your ductwork and gas supply, permitted through the City of Calgary, and inspected before it runs. Quicker Rooter has been installing furnaces across Calgary for over 30 years. We provide upfront pricing, a 1-year warranty on all parts and labour, and certified HVAC technicians who handle everything from assessment to final inspection.
If you are experiencing any of the following, your furnace may be at or past the end of its useful life:
If two or more of these apply, replacing your furnace is likely the right move.
Building a new home, finishing a basement, or renovating? We also handle new construction installations where no existing heating system is in place. Call (403) 294-1288 for a free in-home assessment.
Not every furnace works the same way. The right type depends on your home’s size, your budget, and how much control you want over comfort and energy costs. Here is how the three main types compare.
A single-stage furnace runs at full capacity every time it turns on. These are the most affordable option upfront and are reliable and straightforward to maintain. For smaller homes or budget-conscious installations, a single-stage unit gets the job done.
A two-stage furnace runs at a lower setting most of the time and only kicks up to full capacity during the coldest days. This means quieter operation, more even temperatures, and lower energy bills. Two-stage is the most popular choice for mid-sized Calgary homes.
A modulating furnace continuously adjusts its output to match the exact heating demand at any given moment. This delivers the most consistent temperatures, the quietest operation, and the lowest energy costs. It is the premium option and the best fit for larger homes or homeowners who want maximum efficiency.
Furnace efficiency is measured by AFUE rating, which stands for Annual Fuel Utilization Efficiency. The higher the number, the more of your gas dollar goes toward actually heating your home.
A standard-efficiency furnace runs at around 80% AFUE, meaning 20 cents of every dollar spent on gas goes up the exhaust vent. A high-efficiency furnace runs at 95% to 98% AFUE, meaning nearly all of your gas dollar goes toward heating your home.
Over a 6 to 7 month Calgary heating season, that difference adds up significantly. The higher upfront cost of a high-efficiency unit is typically recovered within 5 to 7 years through lower energy bills.
Heat pumps are gaining popularity across Canada as an alternative to gas furnaces. They transfer heat from outdoor air rather than burning fuel, and they can both heat and cool your home.
However, when Calgary temperatures drop below minus 20, most heat pumps lose efficiency and require a backup heating source. A gas furnace delivers consistent heat regardless of how cold it gets outside, which is why it remains the primary choice for most Calgary homes.
If you are considering a heat pump, a dual-fuel system paired with a gas furnace for extreme cold may be worth discussing with your technician.
Quicker Rooter installs furnaces from trusted manufacturers available through authorized Canadian dealers. Our technicians are experienced with all major brands and can help you choose the right product for your home and budget.
We are not tied to a single dealer or product line, which means our recommendation is based on what fits your home, not what we are incentivized to sell. Call (403) 294-1288 for a free furnace quote.
The cost depends on several factors. The ranges below are general estimates based on typical Calgary installations to give you a starting point. Your actual costs may be higher or lower depending on your specific home and setup.
| Type of Unit | Cost Range |
|---|---|
| Single-stage furnace (80% AFUE) | $4,500 to $5,500 installed |
| Two-stage furnace (95-96% AFUE) | $5,500 to $6,500 installed |
| Modulating furnace (97-98% AFUE) | $6,500 to $9,500 installed |
Quicker Rooter provides a written estimate before any work begins. No hidden fees, no surprises.
Most jobs are completed in a single day. Here is what to expect.
An oversized furnace short-cycles, wastes energy, and wears out faster. An undersized one cannot keep up during Calgary's coldest months. We perform a proper heat-loss calculation based on your home's square footage, insulation, window area, and Calgary's design temperature to ensure the unit is sized correctly.
Our furnace installers arrive on schedule, protect your floors and work area, and remove your old system. The new unit is connected to your ductwork, gas supply, and electrical.
Before we leave, we run the system through a full cycle, check all connections, verify proper airflow through every vent, and confirm the thermostat is calibrated. We then arrange the City of Calgary permit inspection, which typically occurs the next business day.
Since 1993, Quicker Rooter has been installing and servicing furnaces across Calgary. Our technicians have handled every type of home, every brand, and every challenge this climate can present.
All work is performed by licensed heating contractors and certified gas fitting technicians. Every job is permitted and inspected to confirm compliance with Alberta safety codes.
You receive a written estimate before any work begins. The price we quote is the price you pay. If the scope changes, we explain why and get your approval before proceeding.
Every job we complete is backed by a 1-year warranty on all parts and labour, in addition to the manufacturer's warranty on the unit. If something is not right after our work, we come back and fix it at no cost.
Here are the questions Calgary homeowners ask most about getting a new furnace.
Typically $4,500 for a standard single-stage unit to $9,500 or more for a premium modulating system. We provide a free in-home assessment and written quote.
Yes. A 30 year old furnace runs at significantly reduced efficiency, costs more to operate, and carries a higher risk of heat exchanger failure. Replacing it will lower your energy bills and eliminate the risk of unexpected breakdowns.
Most jobs are completed in 4 to 8 hours. More complex work requiring ductwork modifications may take longer.
Yes. All furnace work in Calgary requires a City of Calgary permit and inspection. Quicker Rooter Plumbing & Heating handles both on your behalf.
Sizing is based on a heat-loss calculation that factors in square footage, insulation, windows, and Calgary’s design temperature. We perform this during our free assessment.
Modulating furnaces at 97% to 98% AFUE offer the highest efficiency. For most Calgary homes, a two-stage or modulating unit at 95% or higher is the best balance of upfront cost and long-term savings.
No. This work requires a licensed contractor and a city permit. It involves gas connections, electrical wiring, and combustion safety testing. Alberta law requires a licensed professional.
We install all major brands including Lennox, Carrier, Goodman, Trane, Keeprite, Napoleon, Daikin, and Rheem.
We install furnaces across all Calgary neighbourhoods including Tuscany, Rocky Ridge, Royal Oak, Panorama Hills, Country Hills, Coventry Hills, Bowness, Montgomery, Hillhurst, Kensington, Beltline, Mission, Inglewood, Killarney, Signal Hill, Springbank Hill, Altadore, Bankview, South Calgary, Cranston, Auburn Bay, Shawnessy, and Midnapore.
Whether you are replacing an aging system or upgrading to high-efficiency, Quicker Rooter is ready to help. Call (403) 294-1288.